+852 5222 5828 support@hk-it-support.com Mon–Sat 09:00–19:00 | Emergency 24/7
Services How it works Pricing Why us Clients FAQ Contact Chat on WhatsApp +852 5222 5828
Printer Easy 4 min read

How to set up a new printer on Wi-Fi

First time connecting a new printer to wireless is easiest with WPS or the on-screen menu. Once connected, set a fixed IP so adding it on the PC is smooth.

Printer

Troubleshooting Steps

  1. 1

    Power on the printer and open the Network or Wireless settings menu.

  2. 2

    If the router has a WPS button, press WPS on the printer then on the router and wait for the light to stop flashing.

  3. 3

    Without WPS, pick your home Wi-Fi name in the menu and enter the password with the on-screen keypad.

  4. 4

    After connecting, print the network settings page for the IP and set a fixed IP by MAC in the router.

  5. 5

    On the PC add the printer using a TCP/IP port with the fixed IP and print a test page.

Common Causes

  • The Wi-Fi password was mistyped or the 2.4G/5G band doesn’t match.

  • The router’s WPS wasn’t enabled or the buttons weren’t pressed in time.

  • The printer is too far from the router and the signal is weak.

  • No fixed IP was set, so the address later changed and it went offline.

Advanced Checks

  • Office networks usually need the admin’s SSID and password, or placement on a set VLAN.

  • If it never connects, the Wi-Fi module may be faulty; we can set it up or replace it on-site.

When to Call a Pro

If both WPS and manual setup fail, or it must join a company wireless, we can visit to set it up.

Contact an Engineer

Still stuck?

Our engineers can help right away — on-site or remote.