Smudges, streaks or wrong colours on prints
Black lines, white streaks or off colours usually mean a clogged head, uneven ink or a dirty drum. Run through these steps to bring the quality back.
Troubleshooting Steps
-
1
Open the printer utility on your PC and run Nozzle check to see which colour is missing lines.
-
2
From the same menu run Print head cleaning, wait a few minutes, then print another nozzle check; repeat two or three times.
-
3
For a laser printer, open the front cover, pull out the drum and wipe off loose toner, checking for leaks.
-
4
Check ink or toner level and replace with the correct original or compatible type if low.
-
5
Use the paper and quality setting the vendor recommends, then print again to confirm no streaks.
Common Causes
On inkjets the head dried out and clogged, causing white lines.
Uneven ink or low toner causes colour shift.
The drum or transfer belt is dirty or damaged.
Wrong or too-old paper was used.
Advanced Checks
If the same colour stays missing after several cleans, the head may be permanently clogged and need replacing.
If colours stay wrong after cleaning, the waste pad may be full or the board faulty; we can repair it.
When to Call a Pro
When cleaning and new supplies don’t help, the head or optical parts may be faulty and we can inspect and quote a repair on-site.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.