Server unreachable? Start with power and network
When the server stops responding, check power and cabling first, then use ping and tracert to locate the break.
Troubleshooting Steps
-
1
Confirm the server power LED and fans are on; power cycle if needed.
-
2
Check the network cable is seated and the switch link light is lit.
-
3
Ping the server IP from your PC and watch for timeouts.
-
4
Run tracert (Windows) or pathping to see where packets die.
-
5
Log in to the router and check ARP / DHCP for the correct server IP.
Common Causes
Loose cable or a failed switch port.
Server NIC disabled or a duplicate IP address.
An upstream router or firewall is blocking it.
The server itself crashed and did not reboot.
Advanced Checks
Use ipmitool or iDRAC / iLO to read hardware logs and reboot remotely.
Enable port mirroring on the switch to capture packets and analyse ARP.
When to Call a Pro
If none of this works, it may be hardware or a config issue; we can remote in or visit on-site.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.