USB not recognized or no response? Here’s how to check
Plugging in a USB device gets no response? It’s usually power, a driver, or the port itself — check step by step.
Troubleshooting Steps
-
1
Move to another USB port, preferably a rear port on the PC.
-
2
Plug the same device into a second PC to rule out the device.
-
3
In Device Manager, uninstall “Universal Serial Bus controllers” and rescan.
-
4
Unplug other USB devices to reduce the power load.
-
5
Reboot so the system rescans all USB devices.
Common Causes
USB port underpowered
Driver or controller conflict
Faulty USB device
Physically damaged port
Advanced Checks
Check the BIOS to make sure USB is not disabled.
Use Disk Management to see if an external disk is present but unmounted.
When to Call a Pro
If it fails on every port and every PC, the motherboard USB controller may be dead — we can repair or replace it.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.