Mac won’t turn on or shows a black screen
No response after pressing power, or just a black screen? Don’t panic — it’s often power, display, or a stuck system. These steps fix most cases.
Troubleshooting Steps
-
1
Check power first: plug in the cable firmly, look for the charge light, then wait a few minutes and press power again.
-
2
Try Command+Control+Power to force restart, or hold the power button for 10 seconds and release.
-
3
Connect an external display and tap the brightness keys to confirm it isn’t just the screen.
-
4
Shut down, then hold Shift at boot to enter Safe Mode, then restart normally once loaded.
-
5
Reset NVRAM with Option+Command+P+R and try booting again.
Common Causes
Power cable loose or the charger is faulty with no power in.
A system update stalled midway and the boot file is corrupted.
RAM or display output has a problem.
Logic board or battery hardware failure.
Advanced Checks
Hold the D key at boot to run Apple Diagnostics and check for hardware errors.
Use Target Disk Mode from another Mac to recover your important files first.
When to Call a Pro
If it stays black or totally unresponsive, the logic board or battery may have failed; we can inspect on-site and quote a repair.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.