Black Screen on Boot
Fans spin and lights are on, but the screen is black? Don’t panic — first tell whether it’s the PC or the display.
Troubleshooting Steps
-
1
Listen for a beep or check the Debug LEDs; match any light to the manual to find the failing part.
-
2
Unplug power, hold the power button for 30 seconds to discharge static, then plug in and boot.
-
3
Reseat the GPU and RAM, and gently clean the gold contacts with an eraser.
-
4
Remove the dedicated GPU and use the motherboard HDMI with integrated graphics to isolate the fault.
-
5
Connect a known-good second monitor; still black means the PC, otherwise the original panel.
Common Causes
The GPU is not seated or its contacts are oxidized
The RAM is loose or has a poor connection
The motherboard or power supply has failed
The panel itself or the cable is faulty
Advanced Checks
Strip to a minimal system (no dGPU, extra RAM, or drives) and add parts back one by one to find the culprit.
Clearing CMOS (battery or jumper) can fix a black screen caused by bad BIOS settings.
When to Call a Pro
If even the minimal system stays black, the board, GPU, or PSU is likely faulty and we can inspect on-site.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.