VPN won’t connect? Check the port and certificate
VPN failures are usually a blocked port, expired certificate, or bad credentials; test by protocol.
Troubleshooting Steps
-
1
Confirm the VPN server is on and ping its WAN IP.
-
2
Note the protocol: OpenVPN uses UDP 1194, IKEv2 uses 500 / 4500, SSL VPN uses 443.
-
3
Check the firewall / upstream router forwards and opens the matching port.
-
4
Confirm the user certificate is not expired and credentials and OTP are correct.
-
5
Review the VPN server log for handshake errors.
Common Causes
The firewall or ISP is blocking the VPN port.
The user certificate expired or is not trusted.
The account is locked, or password / OTP is wrong.
The WAN IP changed or DDNS did not update.
Advanced Checks
Use tcpdump / Wireshark to capture the handshake and see where it stops.
Set up DDNS and auto certificate renewal to reduce sudden drops.
When to Call a Pro
If it still will not connect, we can remote in and open the port and reissue certificates.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.