+852 5222 5828 support@hk-it-support.com Mon–Sat 09:00–19:00 | Emergency 24/7
Services How it works Pricing Why us Clients FAQ Contact Chat on WhatsApp +852 5222 5828
Server & NAS Medium 5 min read

Server unreachable? Start with power and network

When the server stops responding, check power and cabling first, then use ping and tracert to locate the break.

Server & NAS

Troubleshooting Steps

  1. 1

    Confirm the server power LED and fans are on; power cycle if needed.

  2. 2

    Check the network cable is seated and the switch link light is lit.

  3. 3

    Ping the server IP from your PC and watch for timeouts.

  4. 4

    Run tracert (Windows) or pathping to see where packets die.

  5. 5

    Log in to the router and check ARP / DHCP for the correct server IP.

Common Causes

  • Loose cable or a failed switch port.

  • Server NIC disabled or a duplicate IP address.

  • An upstream router or firewall is blocking it.

  • The server itself crashed and did not reboot.

Advanced Checks

  • Use ipmitool or iDRAC / iLO to read hardware logs and reboot remotely.

  • Enable port mirroring on the switch to capture packets and analyse ARP.

When to Call a Pro

If none of this works, it may be hardware or a config issue; we can remote in or visit on-site.

Contact an Engineer

Still stuck?

Our engineers can help right away — on-site or remote.