Paper jam — how to remove it safely
Paper jams are common. The key is to pull along the arrow direction slowly and never force it, or small scraps get left behind. Follow the steps to stop it recurring.
Troubleshooting Steps
-
1
Press pause or power off and wait for the print head to stop before touching anything.
-
2
Open the front and rear covers and gently pull the paper out along the arrow direction, never backwards.
-
3
Shine a torch inside to check for small scraps and remove them with tweezers or a dry cloth.
-
4
Check the paper tray: paper should sit flat with guides snug to the edges, not overfilled.
-
5
Close the covers, power on and print a test page to confirm it’s cleared.
Common Causes
Paper loaded unevenly or the tray overfilled, so it feeds badly.
Damp or curled paper was used.
The pickup roller is dirty or worn and can’t grip the paper.
Leftover scraps from an earlier jam caused it again.
Advanced Checks
Wipe the pickup roller with a slightly damp cloth now and then to restore grip.
If it jams at the same spot often, the roller or separator pad is worn and we can replace the part.
When to Call a Pro
If jams keep happening after clearing, or scraps are stuck out of reach, we can visit to disassemble and clean it.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.