Printer is on but your computer says it is offline
The printer is powered on with lights on, yet Windows shows it as offline. This is usually a changed IP or a wrong connection setting. Follow these steps and it’s normally fixed in a few minutes.
Troubleshooting Steps
-
1
Open Settings → Printers & scanners, select the printer and choose Open print queue.
-
2
In the queue window, click Printer and make sure Use printer offline is unchecked.
-
3
Print the network settings page from the printer, or check the on-screen menu for the current IP address.
-
4
If the IP changed, set a reserved (static) IP by MAC address in your router so it won’t change again.
-
5
Delete the printer and re-add it using a TCP/IP port with the new fixed IP.
Common Causes
After a router reboot the printer got a new IP while the PC still remembers the old one.
Use printer offline was accidentally ticked.
Weak Wi-Fi signal makes the printer drop off intermittently.
An aging Wi-Fi module causes the printer to disconnect on its own.
Advanced Checks
Use a TCP/IP port instead of WSD; WSD addresses change and trigger offline status.
If a fixed IP still doesn’t hold and the printer keeps dropping, the Wi-Fi module may be worn out and we can repair or replace it.
When to Call a Pro
If a fixed IP and re-adding the printer don’t help, the network module or main board may be faulty and we can inspect it on-site.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.