Mac external display not detected
Plugged in a monitor but no picture? It’s often the cable, settings, or resolution. These steps fix most cases.
Troubleshooting Steps
-
1
Try Command+Option+Esc to quit apps, then Control+Option+Power to refresh the display.
-
2
Check the cable and adapter are seated, and swap in another cable or port to test.
-
3
Go to System Settings → Displays and hold Option while clicking Scaled to pick the right resolution.
-
4
In Arrangement, make sure the monitor isn’t dragged off-screen, or tick Mirror Displays.
-
5
Restart the Mac, and if needed boot into Safe Mode to rule out a driver or app issue.
Common Causes
The cable or adapter is loose or faulty.
Resolution set beyond what the monitor supports.
macOS display driver or a post-update state glitch.
The monitor’s input source is set wrong (HDMI1/DP).
Advanced Checks
Use System Information → USB/Thunderbolt to see if the Mac detects the monitor hardware.
Reset NVRAM (Option+Command+P+R) and SMC to clear old display settings.
When to Call a Pro
If it still won’t detect after swapping cables and settings, the port or logic board output may be faulty; we can inspect on-site.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.