No Signal on Your Monitor
Seeing a "no signal" message? Check the cable and input source first — it’s usually that simple. Follow these steps before calling anyone.
Troubleshooting Steps
-
1
Confirm the monitor power light is on and the HDMI or DisplayPort cable is seated at both ends.
-
2
Open the monitor OSD menu with its button and pick the correct input source (HDMI 1, DP, etc.).
-
3
Try a different cable or a different port on the monitor to rule out a bad cable.
-
4
Press Win+P during startup and cycle through the projection options to a working mode.
-
5
If fans spin but the screen stays black, power off, unplug, wait, then reboot and check the GPU.
Common Causes
The video cable is loose or plugged into the wrong port
The monitor is set to the wrong input source
The cable or port itself has failed
The graphics card is not seated or has not started
Advanced Checks
Hold the power button for about 30 seconds with the plug removed to discharge static, then retry.
If you have a dedicated GPU, plug the cable into the card’s port, not the motherboard HDMI.
When to Call a Pro
If it stays black after everything above, the card or panel may be faulty and we can inspect it on-site.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.