Cable and Port Choice (HDMI / DP)
Not sure whether to use HDMI or DisplayPort? Simply: pick DP for high refresh, HDMI is fine for everyday use.
Troubleshooting Steps
-
1
Check what your panel supports: for high refresh (144 Hz+) or 4K, choose DisplayPort 1.4 or newer.
-
2
For normal 1080p or a TV, HDMI 2.0 is enough and convenient to share with a set-top box.
-
3
Buy cables by version and certification; cheap unbranded ones often can’t carry high resolutions.
-
4
After connecting, open Advanced display to confirm the real bandwidth, e.g. 4K@60Hz is achieved.
-
5
For runs longer than 2–3 meters, use an active cable with signal boost or switch to DP.
Common Causes
The port version doesn’t match the panel’s needs
You bought an uncertified, cheap cable
The cable is too long and signal degrades
It’s plugged into the motherboard instead of the GPU
Advanced Checks
DisplayPort supports Daisy Chain to link several screens, great for a multi-display desk.
Only HDMI 2.1 supports 4K@120Hz, so check this when buying a box or new console.
When to Call a Pro
If even a quality cable can’t carry high resolution, a port version limit may be the cause and we can inspect on-site.
Contact an EngineerStill stuck?
Our engineers can help right away — on-site or remote.